PWP Single RO/DI System

About the Pure Water Power Single RO/DI System

If you're in the market for a high-performing and affordable water purification system, you've come to the right place.

The Pure Water Power Single RO/DI System is a 4-stage water purification system that can increase the speed at which you work, all while leaving your customer's windows spotless.

Construction 

Pure Water Power doesn't skimp on quality when it comes to manufacturing these hardworking machines.

This unit is donned with all brass quick connections and standard garden hose fittings; you won't be finding any cheap plastic parts here. In addition, a stainless steel RO housing protects the 40-inch membrane. Plus, the 10-inch sediment, carbon, and DI filters are protected by heavy-duty plastic casings.

To make this system even easier to use, rubber feet grip the uneven ground while the system stands upright. Rubber hand grips allow for more comfort when transporting the system from place to place. Plus, the sporty low-profile flat free blue wheels make it easy to roll from your vehicle to your location. All of this top-quality equipment is mounted on a durable, powder-coated steel frame that is rust-resistant and remains stable when upright.

Stages of Filtration

Pure Water Power carefully curated this RO/DI system to be configured with an efficient tap-pressure water output of approximately 1 gallon per minute. To gain this output, this system utilizes four types of filtration for the best and most economical filtration process possible.

The four stages of filtration are as follows:

Stage 1: The incoming water supply is filtered through the sediment filter, which removes rust and large solids.

Stage 2: The water flows through the carbon filter, which eliminates the chlorine.

Stage 3: The chlorine-free water filters through the RO membrane. This process, Reverse Osmosis, removes 98% of the total dissolved solids, otherwise known as TDS, before passing through the final stage.

Stage 4: The deionization stage, otherwise known as DI, filters the water one final time to bring the TDS level down to 0.

Finally, you're left with 100% pure water for cleaning and rinsing without leaving spots on the glass.

Output Levels

This single RO water purification system is capable of producing between .5 and 1 gallons per minute at heights up to 50 feet with a source pressure of 50 PSI. 

It is recommended to use nothing smaller than a 5/16-inch water fed output hose so that the water can flow freely during your workflow. Thread this hose through your favorite water fed pole, and you're ready to get cleaning.

The Bottom Line

If you demand perfection on your water fed jobs, easily connect any water source to the Pure Water Power Single RO/DI System.

WHAT'S INCLUDED:

• TDS Meter
• Small Filter Wrench
• Large Filter Wrench
• RO Guardian
• Lube

PRODUCT HIGHLIGHTS:

• Can be stored, transported, and used flat or upright
• Brass swivel compression fittings on all rubber hoses within the system
• Commercial quality water purification system
• Made in the USA

*Colors may vary

**Info and specs in the printed manual may be outdated. Please reference this product listing for up-to-date info.